Cleaning/Preventive Maintenance
To clean the lenses, use a lint-free cloth and a mild non-abrasive detergent such as liquid dish soap mixed with water. It is important to keep the bill path, rollers, and belts clean. Use a soft lint-free cloth or a cotton swab to wipe dirt and stains from the surfaces of the magnetic and optical sensors, rollers and belts. The sensor lenses are transparent, and made of a polymer material. Handle them with care. Repeat the cleaning process as needed until the Transport path id free of contaminants (See Figure 2-16).
Available Cleaning Card
A JCM Waffletechnology Bill Validator Cleaning Card is now available JCM Part No. 501-000141 (Manufacturer's Part No. KWJCM-B1B15M). The cleaning card is designed to be used as a supplemental part of a Preventive Maintenance program to help in reducing dirt and paper dust build-up within a unit. This will optimize performance between regular Preventive Maintenance intervals.
This is the only cleaning card authorized for use on the UBA Gaming Validator (See Figure 2-17).
Card Features
- A unique Waffletechnology design that hugs all surfaces to insure complete surface cleaning
- Specially designed scrubber patterns insure that belts and O-ring rollers are cleaned and lubricated to prevent them from drying out.
Directions For Use
- Remove cleaning card from pouch and insert it into the Bill Validator.
- The cleaning card will be accepted and then automatically rejected.
- Repeat this process several times to ensure build-up removal.
- Insert and HOLD cleaning card while the Validator pulls on it to ensure proper belt cleaning.
- Dispose of used card in an environmentally safe manner.
For more information and a list of Authorized Waffletechnology Distributors visit: http://www.jcmwaffletechnology.com.